SteamCMD Commands and Convars

SteamCMD Commands and Convars

Description SteamCMD does not have a “list all” command to get all command options within SteamCMD. Instead you have to use find . This script outputs all the commands available and saves it to a file. Usage Simply download the script and run it. wget https://raw.githubusercontent.com/dgibbs64/SteamCMD-Commands-List/master/steamcmdcommands.sh;chmod +x steamcmdcommands.sh;./steamcmdcommands.sh List Results You can get the output without using the script. steamcmdcommands.txt My server now checks daily for updates and posts them to this repo. So this list will always be up-to-date….

Read More Read More

Get the Original Grey Spotify 0.9.7 Design

Get the Original Grey Spotify 0.9.7 Design

Spotify 0.9.7 The new Spotify desktop client 0.9.8 has now been made available for everyone over the past few months. But some of you may prefer the older design and there is no official installer to get the old client. However you can download the old client here. Download Spotify Desktop Client 0.9.7 for Windows and OS X. Screenshot Unofficial Installer by Javier Santos [Recommended] Javier Santos has kindly created an unofficial installer for Spotify 0.9.7 on Windows. You can download below….

Read More Read More

SSH Login Without Password Setup Script

SSH Login Without Password Setup Script

About This is a simple script to allow you to easily setup RSA keys and upload the public key to a remote host for SSH login without requiring a password. This can also be used to add an extra layer of security to your server by using RSA keys and a password. Features Setup SSH login without a password using RSA keys Setup SSH login with a password and using RSA keys Description I found I kept forgetting how to…

Read More Read More

Garrys Mod Linux server GLIBC_2.15 fix

Garrys Mod Linux server GLIBC_2.15 fix

Problem Facepunch Studio have released an update for Garrys Mod server that may cause the following error. Failed to open dedicated_srv.so (/lib/libm.so.6: version `GLIBC_2.15′ not found (required by bin/dedicated_srv.so)) or Failed to open dedicated_srv.so (/usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15′ not found (required by bin/dedicated_srv.so)) Facepunch have needed to update Garry’s Mod to use GLIBC_2.15.  because of this you will have the issue if GLIBC is older than GLIBC_2.15. This effects the following distros: CentOS 6 Debian 7 Ubuntu 12.10 or lower To…

Read More Read More

Parallels Plesk Panel Maillog location Linux

Parallels Plesk Panel Maillog location Linux

When trying to find the email logs on my Plesk server I struggled to find them at first. Parallels Plesk Panel maillog is in a non standard location compared to you standard Linux system. On most Linux systems you will find the mail log in /var/log. However Plesk Panel stores the logs in usr/local/psa/var/log. If you want to see the servers mail log use the following command. tail -f /usr/local/psa/var/log/maillog I recommend creating a symbolic link to plesk logs within…

Read More Read More

CentOS 6: Setting a Static IP address

CentOS 6: Setting a Static IP address

This is a quick tutorial on how to set a static IP address using the terminal within CentOS 6. Set the Static Address 1. Check which interface(s) you want to set as static. eth0 Link encap:Ethernet HWaddr 4C:72:B9:D1:D3:26 inet addr:192.168.1.58 Bcast:5.135.164.255 Mask:255.255.255.0 inet6 addr: fe80::4e72:b9ff:fed1:d326/64 Scope:Link inet6 addr: 2001:41d0:8:e77b::1/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:640586231 errors:0 dropped:0 overruns:0 frame:0 TX packets:1476012131 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:98117934406 (91.3 GiB) TX bytes:953623859810 (888.1 GiB) Interrupt:20 Memory:fe500000-fe520000…

Read More Read More

How to Install and Use SteamCMD

How to Install and Use SteamCMD

This is a brief tutorial on the basics of installation and usage of SteamCMD. Windows 1. Create a folder for SteamCMD. C:/steamcmd 2. Download the SteamCMD (Windows) Update Tool. http://media.steampowered.com/installer/steamcmd.zip 3. Extract the contents of the zip to the folder. Linux 1. Create a user for SteamCMD and login. Note: For security best practice do not run SteamCMD a root. adduser steam su – steam 2. Create a directory for SteamCMD. mkdir /home/steam/steamcmd cd /home/steam/steamcmd 3. Download the SteamCMD (Linux)…

Read More Read More

SteamCMD Dedicated Server List

SteamCMD Dedicated Server List

I decided to put together a list of all the Dedicated servers available on Steam. This will hopefully be useful to server administrators. I have also put the results on the Valve Wiki page. Here are my results. They are accurate as of April 2015. This is a list of dedicated servers available on Steam/SteamCMD. Key Server – Server Name ID – Server AppID SteamCMD – If available via SteamCMD Steam Client – If available via the Steam Client Anonymous Login –…

Read More Read More

Download Spotify 0.9.8 Desktop Client

Download Spotify 0.9.8 Desktop Client

Spotify 0.9.8 The new Spotify desktop client 0.9.8 has been made available for a select few users automatically to test over the past couple of months. It has not yet been made available as general release. There is no way to official install the client currently unless you are lucky enough to be selected. However you can download the new client here and test is yourself. Download Spotify Desktop Client 0.9.8 for Windows and Mac. Screenshot Unofficial Installer by Javier Santos…

Read More Read More

Fedora 20: Setting a static IP address

Fedora 20: Setting a static IP address

This is a quick tutorial on how to set a static IP address using the terminal within Fedora 20. Disable Network Manager 1. First stop and disable the gnome network manager from running on boot. systemctl stop NetworkManager.service systemctl disable NetworkManager.service 2. Now start and enable the network service to run on boot. systemctl restart network.service systemctl enable network.service Set the Static Address 1. Check which interface(s) you want to set as static. [[email protected] ~]# ifconfig em1: flags=4163 mtu 1500…

Read More Read More